About
- Categories:About
- Time of issue:2019-08-05 00:00:00
- Views:0
Description: Sichuan Renyi Electric Co., Ltd. is registered under the name of Ren Yi, a senior technician for substation maintenance, and uses scientific research, knowledge innovation, publicity, promotion, and teaching that the temperature of electrical contacts (connectors) is lower than the temperature of its conductors (wires). The theory and technology of "thermal electrical contacts" produces and sells registered trademarks of electrical equipment that do not overheat electrical contacts (joints). Patented products are integrated.
Our company takes the problem of "electric contact overheating" (commonly known as poor contact) when the temperature of the electrical contact (joint) is higher than (equal to) the temperature of its conductor (line) as its own job, so as to completely eliminate the accident of electrical contact overheating. aims!
Take technology as the guarantee, reputation as the fundamental, and benevolence and justice as the motto.
Burn out electrical equipment caused by overheating of electrical contacts in various fields, industries, and various (a) power systems across the country (the world), causing short circuits, power supply interruptions, increased line losses, electrical fires, aircraft crashes, The "spontaneous combustion" of automobiles, etc., as well as the loss of people's lives and property are regarded as our sins!
Since the 1950s and 1960s, my country’s electric power system has basically suffered from: oxidation and corrosion of electrical contacts (electrical and chemical corrosion); weak electrical contacts; poor contact; what electrical contact’s contact resistance is not more than 100% of the same length of conductor Twenty points; The history of overheating of electrical contacts (connectors), the history of overheating, the habitual error theory, and even the national standards have problems of varying degrees. Many industry guide books, special electrical work, college and secondary school textbooks, and technical methods basically use "Yao and Shun" to treat water, treat symptoms but not cure the cause, and passively prevent. Once such so-called equipment accidents occur, do not look for the main contradiction of overheating. , Only make a fuss about the phenomenon of oxidation and corrosion of the surface, and constantly repeat the mistakes of the past, and the use of such methods as repairs can not remedy the huge losses caused by the overheating accident of the electrical contacts.
Over the years, many people of insight have tried to solve the old problem of overheating electrical contacts. Many predecessors and heroes who have not solved or partially or temporarily solved this type of fault have finally failed to escape the "overheating" circle in theory. , Overheating of electrical contacts has restricted the development of the national economy, increased productivity, and has become a "cancer" for the safe production, economic operation, energy saving and consumption reduction, reliable power supply, and social harmony of the power system.
After more than 40 years of repeated testing, continuous exploration and continuous improvement from production practice to theory: the electrical contact (joint) temperature is lower than the conductor (line) temperature of the "not hot electrical contact" theory and technology, but The research on thermal electrical contacts, but the scientific and technological achievements of special fasteners for thermal electrical contacts, Chuankejianzi [2011] No. 018 appraisal, and it was logged on the Science and Technology Achievement Network on March 16, registration number 9512011Y0026. The problem of overheating of electrical contacts at home and abroad was overcome in one fell swoop.
The company will actively cooperate with the government and relevant functional departments in various fields, industries, and various (a) power systems to completely correct the historical and traditional "electrical contact overheating" habitual error, and another "but The new way of thermal electrical contacts. Using the theory and technology of "not overheating electrical contacts", from education and training, design and manufacturing, installation and acceptance, before powering on and putting into operation, all electrical contacts are made into a brand new power system of "not overheating electrical contacts" one by one, and one by one Renovate the old system of the original "electric contact overheating", and do a good job of completely eliminating the overheating of the electrical contact, which is "infinite merit"! Strive to enter a new era of "overheated electrical contact" in a relatively short time.
Description: Sichuan Renyi Electric Co., Ltd. is registered under the name of Ren Yi, a senior technician for substation maintenance, and uses scientific research, knowledge innovation, publicity, promotion, and teaching that the temperature of electrical contacts (connectors) is lower than the temperature of its conductors (wires). The theory and technology of "thermal electrical contacts" produces and sells registered trademarks of electrical equipment that do not overheat electrical contacts (joints). Patented products are integrated.
Our company takes the problem of "electric contact overheating" (commonly known as poor contact) when the temperature of the electrical contact (joint) is higher than (equal to) the temperature of its conductor (line) as its own job, so as to completely eliminate the accident of electrical contact overheating. aims!
Take technology as the guarantee, reputation as the fundamental, and benevolence and justice as the motto.
Burn out electrical equipment caused by overheating of electrical contacts in various fields, industries, and various (a) power systems across the country (the world), causing short circuits, power supply interruptions, increased line losses, electrical fires, aircraft crashes, The "spontaneous combustion" of automobiles, etc., as well as the loss of people's lives and property are regarded as our sins!
Since the 1950s and 1960s, my country’s electric power system has basically suffered from: oxidation and corrosion of electrical contacts (electrical and chemical corrosion); weak electrical contacts; poor contact; what electrical contact’s contact resistance is not more than 100% of the same length of conductor Twenty points; The history of overheating of electrical contacts (connectors), the history of overheating, the habitual error theory, and even the national standards have problems of varying degrees. Many industry guide books, special electrical work, college and secondary school textbooks, and technical methods basically use "Yao and Shun" to treat water, treat symptoms but not cure the cause, and passively prevent. Once such so-called equipment accidents occur, do not look for the main contradiction of overheating. , Only make a fuss about the phenomenon of oxidation and corrosion of the surface, and constantly repeat the mistakes of the past, and the use of such methods as repairs can not remedy the huge losses caused by the overheating accident of the electrical contacts.
Over the years, many people of insight have tried to solve the old problem of overheating electrical contacts. Many predecessors and heroes who have not solved or partially or temporarily solved this type of fault have finally failed to escape the "overheating" circle in theory. , Overheating of electrical contacts has restricted the development of the national economy, increased productivity, and has become a "cancer" for the safe production, economic operation, energy saving and consumption reduction, reliable power supply, and social harmony of the power system.
After more than 40 years of repeated testing, continuous exploration and continuous improvement from production practice to theory: the electrical contact (joint) temperature is lower than the conductor (line) temperature of the "not hot electrical contact" theory and technology, but The research on thermal electrical contacts, but the scientific and technological achievements of special fasteners for thermal electrical contacts, Chuankejianzi [2011] No. 018 appraisal, and it was logged on the Science and Technology Achievement Network on March 16, registration number 9512011Y0026. The problem of overheating of electrical contacts at home and abroad was overcome in one fell swoop.
The company will actively cooperate with the government and relevant functional departments in various fields, industries, and various (a) power systems to completely correct the historical and traditional "electrical contact overheating" habitual error, and another "but The new way of thermal electrical contacts. Using the theory and technology of "not overheating electrical contacts", from education and training, design and manufacturing, installation and acceptance, before powering on and putting into operation, all electrical contacts are made into a brand new power system of "not overheating electrical contacts" one by one, and one by one Renovate the old system of the original "electric contact overheating", and do a good job of completely eliminating the overheating of the electrical contact, which is "infinite merit"! Strive to enter a new era of "overheated electrical contact" in a relatively short time.
Information
Sichuan Renyi Electric Co., Ltd. is registered under the name of Ren Yi, a senior technician for substation maintenance, and uses scientific research, knowledge innovation, publicity, promotion, and teaching that the temperature of electrical contacts (connectors) is lower than the temperature of its conductors (wires). The theory and technology of "thermal electrical contacts" produces and sells registered trademarks of electrical equipment that do not overheat electrical contacts (joints). Patented products are integrated.
Our company takes the problem of "electric contact overheating" (commonly known as poor contact) when the temperature of the electrical contact (joint) is higher than (equal to) the temperature of its conductor (line) as its own job, so as to completely eliminate the accident of electrical contact overheating. aims!
Take technology as the guarantee, reputation as the fundamental, and benevolence and justice as the motto.
Burn out electrical equipment caused by overheating of electrical contacts in various fields, industries, and various (a) power systems across the country (the world), causing short circuits, power supply interruptions, increased line losses, electrical fires, aircraft crashes, The "spontaneous combustion" of automobiles, etc., as well as the loss of people's lives and property are regarded as our sins!
Since the 1950s and 1960s, my country’s electric power system has basically suffered from: oxidation and corrosion of electrical contacts (electrical and chemical corrosion); weak electrical contacts; poor contact; what electrical contact’s contact resistance is not more than 100% of the same length of conductor Twenty points; The history of overheating of electrical contacts (connectors), the history of overheating, the habitual error theory, and even the national standards have problems of varying degrees. Many industry guide books, special electrical work, college and secondary school textbooks, and technical methods basically use "Yao and Shun" to treat water, treat symptoms but not cure the cause, and passively prevent. Once such so-called equipment accidents occur, do not look for the main contradiction of overheating. , Only make a fuss about the phenomenon of oxidation and corrosion of the surface, and constantly repeat the mistakes of the past, and the use of such methods as repairs can not remedy the huge losses caused by the overheating accident of the electrical contacts.
Over the years, many people of insight have tried to solve the old problem of overheating electrical contacts. Many predecessors and heroes who have not solved or partially or temporarily solved this type of fault have finally failed to escape the "overheating" circle in theory. , Overheating of electrical contacts has restricted the development of the national economy, increased productivity, and has become a "cancer" for the safe production, economic operation, energy saving and consumption reduction, reliable power supply, and social harmony of the power system.
After more than 40 years of repeated testing, continuous exploration and continuous improvement from production practice to theory: the electrical contact (joint) temperature is lower than the conductor (line) temperature of the "not hot electrical contact" theory and technology, but The research on thermal electrical contacts, but the scientific and technological achievements of special fasteners for thermal electrical contacts, Chuankejianzi [2011] No. 018 appraisal, and it was logged on the Science and Technology Achievement Network on March 16, registration number 9512011Y0026. The problem of overheating of electrical contacts at home and abroad was overcome in one fell swoop.
The company will actively cooperate with the government and relevant functional departments in various fields, industries, and various (a) power systems to completely correct the historical and traditional "electrical contact overheating" habitual error, and another "but The new way of thermal electrical contacts. Using the theory and technology of "not overheating electrical contacts", from education and training, design and manufacturing, installation and acceptance, before powering on and putting into operation, all electrical contacts are made into a brand new power system of "not overheating electrical contacts" one by one, and one by one Renovate the old system of the original "electric contact overheating", and do a good job of completely eliminating the overheating of the electrical contact, which is "infinite merit"! Strive to enter a new era of "overheated electrical contact" in a relatively short time.
Scan the QR code to read on your phone
