APCE
/
/
/
Ren Yi Electric Encyclopedia: Precautions for oil filling after 35 kV transformer overhaul

Ren Yi Electric Encyclopedia: Precautions for oil filling after 35 kV transformer overhaul

  • Time:2020-07-08 12:39
  • Visits:

(Summary description)After the 35 kV transformer is overhauled, it is necessary to fill the transformer with oil. Before and after the oil filling operation, what are the matters that need to be paid attention to? The editor of the electrician world will take you to understand.

Ren Yi Electric Encyclopedia: Precautions for oil filling after 35 kV transformer overhaul

(Summary description)After the 35 kV transformer is overhauled, it is necessary to fill the transformer with oil. Before and after the oil filling operation, what are the matters that need to be paid attention to? The editor of the electrician world will take you to understand.

  • Categories:Industry News
  • Author:Ren Yi
  • Origin:http://www.scrydq.com
  • Time of issue:2020-07-08 12:39
  • Views:
Information
After the 35 kV transformer is overhauled, it is necessary to fill the transformer with oil. Before and after the oil filling operation, what are the matters that need to be paid attention to? The editor of the electrician world will take you to understand.
 
Oil filling method for 35 kV transformer
 
1. Preparation before oil injection
 
When all parts of the transformer have been installed and carefully checked to confirm that all bolts have been tightened, a pressure oil filter can be used to inject oil from the lower valve of the transformer.
 
When filling oil, the oil temperature cannot be lower than 10 degrees Celsius. The oil is injected from the bottom to facilitate the air in the transformer to be discharged from the gap between the turns.
 
2. Precautions when filling oil
 
1. Loosen the bleed bolts on the parts that accumulate air (such as the upper cover of the thermosiphon, the upper header of the radiator, the manhole door blocking plate, the top of each porcelain bushing and the upper cover of the Buchholz relay), and lower Look up and tighten the butterfly bolt immediately when it leaks oil.
 
2. Open the upper and lower butterfly valves of each radiator and thermosiphon filter. When the oil is filled to a certain level, tap each radiating pipe lightly to check whether it is filled with oil.
 
3. Check each gasket for seepage and oil leakage; when the casing is full of oil, tighten its exhaust bolt; when the oil level is slightly higher than the oil level corresponding to the ambient temperature, stop oiling.
 
4. After stopping the oil filling, immediately clean the outer surface of the transformer to wipe off all the oil stains with a cloth; after the transformer is allowed to stand for 24 hours, check the sealing condition of the gaskets, and loosen the exhaust bolts again to drain as much as possible In the exhaust process, once oil leakage is found, tighten the exhaust bolt to prevent residual gas from entering the Buchholz relay when the transformer is heated during operation, causing the relay to malfunction.
 
 
 
Sichuan Renyi Electric Co., Ltd. is registered under the name of Ren Yi, a senior technician for substation maintenance, and uses scientific research, knowledge innovation, publicity, promotion, and teaching that the temperature of electrical contacts (connectors) is lower than the temperature of its conductors (wires). The theory and technology of "thermal electrical contacts" produces and sells registered trademark electrical equipment that does not heat electrical contacts (joints), as a whole with patented products.
Today

Today talks about: Solving various electrical disasters from the source of electricity -

Mount Everest on Electricity [Today's Talk]: The difference between "heating" and "overheating"; the three stages of "Electrical Contact Overheating":
2019-11-18
119

119 Safety and firefighting must be done practically. "Superconductivity" cannot solve man-made disasters such as electrical fires!

119 Safety and firefighting must be done practically. "Superconductivity" cannot solve man-made disasters such as electrical fires!
2019-11-09
Pay

Pay special attention to the power safety revolution forum, and Mount Everest discusses electricity-to solve the mystery of a century of electrical disasters in the world of man-made disasters! Solve and eradicate the global ...

Pay special attention to the power safety revolution forum, Mount Everest on electricity-to solve the mystery of a century of electrical disasters and man-made disasters in the world! Solve and eradicate the global problems of air disasters, fires and spontaneous combustion from the source of electricity! Look at the Tianbang in Nanchong and Niuhuang Wan in Chengdu, one of China's ribs. In decades of production practice, how to continuously explore, repeatedly test, reverse thinking, gradually improve, and independently innovative scientific and technological achievements. This intellectual property, which is unique to China in the world, is completely independent, and is sent to the country free of charge. Take a look at the folk "Lao Lai Le", defying academic authority, summoning conscience, calling for revolution, and creating a unique world, how to overcome electrical disasters and man-made disasters, this worldwide problem! Special reminder: This is just advice and advice, not an advertisement. If you believe in an advertisement, or listen to advice and advice, it's up to you. This is a matter of folk merit. Advice and advice do not ask for compensation, do not ask for likes, do not want to be Internet celebrities, improper celebrities, just because of professional responsibility, just because I see someone killed by an electrical disaster, my conscience is also disturbed. WeChat friends, and their respective media think this is positive energy and a good thing. You can be busy reprinting and disseminating the original text (the original propaganda and promotion are not for profit, and I am responsible for mistakes). If the national media wants to propagate and disseminate, first declare: this is not advertising! Without money, who can do it?
2019-11-08
Special

Special attention should be paid to national power safety in summer

History, tradition, and habit believe that: poor contact; weak electrical contacts (joints); electrical contacts whose temperature is higher than (exceeds) the temperature of its conductor (line). The theoretical concept of "electrical contacts overheating" is wrong! It is believed that oxidative corrosion (chemical, electrical corrosion) caused the "electrical contact overheating", which reverses the causality! Please go to the China Renyi Electric Platform (challenge) for academic discussion and debate!
2015-07-23

CONTACT US

 

Email: 577538063@qq.com

Phone:+86 13438175710

ADD

 

128 Hongyang East Road, Qingbaijiang District, Chengdu

CHENGDU BRANCH

 

Room 3101, Tower 2, Raffles City, Wuhou

District, Chengdu,PR China

+86 13438175710
577538063@qq.com

 Copyright © 2022 Sichuan Renyi Electric Co., Ltd. 蜀ICP备12025125号  Powered by:www.300.cn   SEO